Edmonton Stucco & Coatings provides professional stucco repairs in Edmonton, AB, for cracked, stained, or water-damaged walls before small problems get expensive. We handle stucco and EIFS repair on commercial and residential properties, from hairline cracking to full section replacement after moisture intrusion. We diagnose the cause first, match texture and coating so the repair blends in, and build every fix for Alberta’s freeze-thaw climate.
Stucco repair in Edmonton fixes cracking, patching, loose sections, and failing EIFS finishes before minor damage turns into a bigger problem behind the wall. Edmonton Stucco & Coatings repairs traditional stucco and EIFS on homes and commercial buildings throughout Edmonton, assessing each job to find the cause of the damage, not just patch what’s visible.
35 years of practical experience across a wide range of stucco and coating systems.
A strong track record serving both residential and commercial properties throughout the Edmonton area.
Stucco repair cost in Edmonton depends on the size and cause of the damage. Small crack repairs typically run a few hundred dollars, while larger sections with underlying moisture damage can run into the thousands. Every quote comes from a free on-site estimate, not a phone guess, since two cracks that look identical can have very different causes underneath.
Edmonton properties use a mix of traditional hard-coat stucco, synthetic acrylic stucco, and EIFS acrylic finish systems, and each repairs differently. Hard-coat stucco is the cement, sand, and lime mix most common on older homes, repaired with matching cement-based products. Synthetic and EIFS finishes use acrylic-based materials over a different substrate, so repairs need acrylic-compatible products to bond properly and flex the same way the surrounding finish does.
Hairline and structural cracks get treated differently. A hairline crack is usually surface stress from temperature movement and gets sealed and patched directly. A wider or diagonal crack often points to settling or moisture behind the wall, which needs to be addressed before the crack itself is filled, or it reopens within a season.
EIFS damage often looks like ordinary stucco cracking on the surface but involves the insulation board and drainage layer underneath. Using incompatible repair materials on EIFS can trap moisture inside the wall assembly instead of keeping it out. Full details are on our EIFS page.
Parging on foundations, chimneys, and ICF blocks fails differently than wall stucco, usually from ground-level moisture and freeze-thaw pressure rather than impact or settling. See our parging page for the full repair process.
Patching repairs isolated damage — a hole, a chip, an impact mark — by matching the existing texture and colour so the repair blends into the surrounding wall instead of standing out as an obvious patch.
Stucco that sounds hollow when tapped or has visibly separated from the wall has lost its bond to the substrate underneath. This isn’t a surface fix — the affected section needs to come off and be reapplied properly, or it will keep failing in the same spot.
Edmonton Stucco Coating is led by a stucco professional with 35 years of hands-on experience across EIFS, acrylic coatings, traditional stucco, and masonry work in the Edmonton area. That experience covers residential and commercial projects, with a track record across 900-plus completed stucco, EIFS, and coating jobs.
Edmonton’s climate puts exterior finishes through significant seasonal changes. Freezing temperatures, summer heat, moisture, and repeated temperature swings can all affect a stucco system over time.
That’s why proper installation matters. From preparing the substrate and reinforcing the system to applying the finish correctly, each stage needs to work together. A well-installed stucco system can provide the durability, appearance, and performance expected from a professional exterior finish.
Our top priority is customer satisfaction and we work closely with clients to understand their unique needs and goals.
Every property is assessed on-site, not quoted from a photo, so the recommendation matches what's actually happening to the existing finish — not a generic estimate.
Material and labour are broken down separately, so you know exactly what you're paying for on a recoat, a repair, or a full EIFS installation. No bundled pricing that hides which part of the job costs what.
Edmonton Stucco & Coatings is led by a stucco professional with 35 years of hands-on experience across EIFS, acrylic coatings, traditional stucco, and masonry work in the Edmonton area — a track record across 900-plus completed projects.
Stucco repair only holds up when it’s built on solid technique, not shortcuts. With 35 years of hands-on experience across traditional stucco, EIFS, and acrylic coatings, we diagnose the actual cause of the damage before repairing it — then match texture and finish so the fix disappears into the wall around it.
35 years of practical experience across a wide range of stucco and coating systems.
A strong track record serving both residential and commercial properties throughout the Edmonton area.
Discover how we’ve transformed ideas into reality through our exceptional construction solutions.
Explore our most frequently asked questions about stucco coatings, repairs, EIFS, and our services.
A properly executed repair, matched to the existing material and finish, typically lasts as long as the surrounding stucco — often 15 to 20 years or more before needing attention again. Repairs that skip addressing the underlying cause tend to fail much sooner, sometimes within a season.
The leading causes are moisture getting behind the finish, repeated freeze-thaw stress, poor original installation, and UV exposure wearing down the coating over years. In Edmonton, freeze-thaw cycling is usually the accelerating factor behind damage that would otherwise take decades to show up.
Small, isolated repairs can be patched and recoated locally. Larger or older walls often need the full section recoated so the repair doesn’t weather differently and become visible over time.
Repairs need stable temperatures above roughly 4°C to cure properly, so late fall through winter is the riskiest window. Damage found heading into winter is usually better sealed temporarily, with the full repair scheduled for spring once temperatures stabilize.
Yes, when installed correctly. EIFS adds insulation value that traditional stucco doesn’t, but the finish coating still needs to be built for the region’s temperature swings, or it can fail well before the insulation underneath it does.
We repair stucco, EIFS, and parging throughout all seven of Edmonton’s geographic sectors, plus the surrounding communities of Sherwood Park, Spruce Grove, Fort Saskatchewan, St. Albert, Beaumont, and Leduc. That includes Downtown, West Edmonton, Southeast Edmonton, Terwillegar, Windermere, Riverbend, Clareview, and the neighbourhoods around them.
